Epoxy flooring is a prevalent type of flooring, especially in garages. It is a durable, long-lasting, and cost-effective option for homes and businesses.
Epoxy flooring comprises resin, adhesion mechanisms, and other unique additives. The mixture can deliver a high-performance coat for a variety of flooring applications.
Epoxy flooring is guaranteed to last more than two decades if maintained properly. They can withstand inclement weather. However, when your garage is coated with epoxy, it can take days to cure completely.
The epoxy application may also reduce strong fumes. So if you are the type of homeowner who despises strong smells, you may need to stay away from the garage for a few days.
Further, epoxy flooring can be slippery when wet, so make sure to texturize it to make it a little slip-proof. Keep them out of wet epoxy flooring if you have kids to avoid injuries. You may also put up signs to remind you and your family members that the floor is slippery.
If you are considering durable Houston epoxy flooring, you are probably doing your research about it. If you are not, then you should start here. Before coating your garage with epoxy, the preparation tips will be enumerated here.
Things To Do Before Garage Floor Epoxy Coating
- Clear your garage
This step is required before installing any floor. Sweep up any dirt and dust to clean the exterior and guarantee that the new flooring adheres perfectly.
If there is moveable furniture stocked in the garage, put them away. Your car should also be out of the garage. Make sure to clear out your garage to make the epoxy coating faster.
- Keep your pets and kids away from the garage.
If you want the process to be done without obstruction, keep pets and kids out of the area. Kids are naturally curious, so that they may play with the epoxy. Pets may run around the floor, causing the process to be done much slower than it should.
In addition, epoxy has a very strong smell that may be bad for your kids and pets.
- Ensure that your garage floor is flat.
A flat and level garage floor may guarantee the highest epoxy outcome. So, make sure that your garage floor is flat before the epoxy coating.
- Get rid of holes
Patching spots and cracks with a variety of appropriate products are repeatedly required prior to installing epoxy flooring. Some of these patching products can come off as hard as concrete. Do not be upset if the surface to which you want to apply the epoxy flooring is cracked or has gaps in it because you can patch them up.
These gaps and breaks will not affect the quality and appearance of the flooring if you use the right patching products.
- Acid etching
One way to prepare your garage floor is by applying an acid solution to your floor. Once evenly disseminated, work the acid solution with a scrubber, unbendable bristle broom, or equivalent tool. Allow the acid to sit for up to ten minutes.
Remember to remove the used acid. This can be achieved by power washing the floor and then vacuuming it after it has dried. Make certain that the acid residue is cleared before the acid parches. All in all, it is important to neutralize the remaining acid residue.
- Diamond Grinding
The diamond grinding technique necessitates the use of machinery. You’d need a floor grinder and the appropriate floor attachments. The diamond grinding technique would restore the smoothness of your floor, which is necessary before coating it with epoxy floor coating.
The last two steps mentioned may be complicated. You do not have to do it yourself; instead, leave it to the experts in epoxy garage floor Houston homeowners trust. From the preparation to the application, they will be in charge.